Equipment Power PCB
Equipment Power PCB – Specifications
|
Parameter |
Specification |
|
Base Material |
FR-4, High-Tg FR-4, High-CTI FR-4 |
|
Layer Count |
2 – 20 layers, or as per file |
|
Board Thickness |
0.5 – 3.5 mm, or as per file |
|
Copper Thickness |
0.5 – 6 oz, or as per file |
|
Min Trace/Space |
4/4 mil (thick copper series) |
|
Min Hole Size |
0.2 mm (PTH/NPTH) |
|
Surface Finish |
ENIG, HASL (L/F), OSP, ImmAg, ImmSn, Hard Gold |
|
Solder Mask |
Green, White, Red, Black, Blue, Yellow, Purple |
|
Silkscreen |
Black / White |
|
Dimension Tolerance |
±0.10 mm |
|
Impedance Control |
±10% or per file |
Power Supplies That Never Quit
Industrial equipment runs continuously. A server power supply stays on for years. A medical power supply cannot fail during surgery. An LED driver in a streetlight must last a decade. Boyastar builds Equipment Power PCBs for these non-stop applications.
Continuous operation changes design priorities. Thermal management becomes the primary concern. Our Equipment Power PCBs use wide power traces to distribute heat evenly. Copper thickness ranges up to 6 oz on high-current sections. Thermal vias under power components conduct heat to internal copper planes. We use high-Tg material that maintains insulation properties at elevated temperatures. The goal is to keep the board cool enough to run indefinitely without degradation.
Space is often limited. Equipment power supplies squeeze into tight enclosures. Our boards support high-component-density layouts with fine traces down to 4/4 mil (thick copper series). We offer multiple surface finishes to match your assembly process. HASL is cost-effective. ENIG provides better solder joint reliability. OSP suits fine-pitch components. Each board is 100% tested. Boyastar has been in PCB manufacturing for 18 years. We produce over 50,000 square meters monthly. ISO 9001 and UL certifications cover all processes.
Hot Tags: equipment power PCB, China equipment power PCB manufacturers, suppliers, factory
You Might Also Like
Send Inquiry